5
ENGLISH
Mount Location
Stud
Stud,
Back Support
Mount Location
Stud,
Back Support
INSTALLATION PROCEDURE
1. Use the attached template for location and make sure that all the screws
mount into wood studs. A stud sensor or another stud locating method
can be used to locate the studs behind the wall.
2. Drilling mounting holes.
For Drywall
:
•
Drill a 4mm (5/32”) holes at each marked location.
For Ceramic Tile
:
•
Drill 8mm (5/16”) holes - a minimum of 60mm (2
3/8
”) deep at each
marked location.
•
Insert anchors until they are flush with the face of the finished wall.
•
Apply silicone sealant into all drilled holes.
Stud,
Back Support
Wall Mount Screw
Cap Nut
<Side View>
Finished Wall
Hole,
Mount Location
Stud,
Back Support
Cap Nut
