3
Attentions in construction and maintenance
Warning
Do not reverse the water inlet pipe and handheld shower water outlet pipe.
Otherwise, the product will not be able be used normally.
When switching from the bath shower side to the handheld shower side or
from the handheld shower side to the bath shower side, the water
temperature may change. Please use after feeling the water temperature
with hand. Otherwise, scalding may occur.
1.
2.
Attentions
Maintenance
As the switching cartridge is a precise component, do not dismantle it without
authorization. Otherwise, such poor conditions as water leakage, etc. may be
caused.
Do not impact the product. Otherwise, failure and water leakage may be
caused.
It is imperative to use a neutral detergent in cleaning. Other detergents than
a neutral one may damage the plating coat or make the surface discolor.
Do not use any such detergent as acidic detergent and abstergent, polishing
powder, etc. containing thick particles and nylon brush. Otherwise, the
plating coat may be damaged, etc.
It is allowed to use a piece of soft cloth to wipe or use from time to time a
piece of cloth immersed in machine oil or vehicle wax to wipe. However, do
not contact with resin components. Otherwise, they may lose the gloss and
become rusty.
It is suggested not to leave it unused for a long time. Otherwise, this may
lead to internal and external rust to water faucet to such a degree that it
cannot be used any more, etc.
With the product design being updated constantly, the physical object may
not coincide with the figure. However, the basic principle for installation, use
is the same.
As a water supply inspection is made before ex-factory, there may be water
left in the faucet and this is not a problem with the product.
The product must be kept away from heat sources such as fan heaters, bath
heat lamps, etc., which may damage the surface and the internal
components of the sprayer.
1.
2.
3.
4.
5.
6.
7.
8.
9.
To maintain a beautiful appearance of the product, the user is requested to
conduct maintenance and care in the following method.
Wipe with a piece of soft cloth frequently and use a piece of soft cloth
dipped in water to wipe from time to time.
When dirt exists obviously, please use water to wash sufficiently after
wiping with a neutral detergent.
1.
2.
Use condition and attentions in construction
Use condition
Cold water supply*hot water supply pressure
Minimum pressure ………………… 0.05MPa (flow pressure)
Maximum pressure ………………… 1.0MPa (static pressure)
Recommended service pressure：
TBW01001*……0.12-0.5MPa(flow pressure)
TBW02001*……0.12-0.5MPa(flow pressure)
TBW01002*……0.15-0.5MPa(flow pressure)
TBW02002*……0.15-0.5MPa(flow pressure)
The temperature for water supply is 4~90℃. It is suggested to use the
temperature of 60±5℃. Do not use steam to supply hot water.
The ambient temperature when using the product should be above 0℃ and
below 60℃. If the temperature is not above 0℃, deformations, cracking due to
frost, etc. may occur in the handheld sprayer. Likewise, temperatures over 60℃
may result in damage to the internal components of the handheld sprayer.
To prevent internal shower damage, the shower water outlet temperature shall
not exceed 60℃. It is suggested to use a temperature below 45℃.
Being out of use for a long time may result in internal and external rust to the
faucets and being unable to be used.
If you want to scrap this product, do not treat it as you do for general household
garbage. Please follow relevant statutes to have it treated, recovered and
collected appropriately by an independent recovery system.
The product in these instructions has a cleaning function.
※ To attain the best installation and operation effect, it is recommended that
the faucet should be used with the handheld series shower and wall mounting
type bathtub faucet from TOTO.
1.
2.
3.
4.
5.
6.
7.
Attentions in construction
Warning: it means that ignoring this mark and misoperation may cause
serious personal injury and death.
Attention: it means that ignoring this mark and misoperation may cause
personal injury or property loss.
4
