56
57
R
ef
erenc
e
W
h at to D o?
I f y ou c annot operate w ith th e rem ote c ontrol
If the water does not flow due to a water service interruption
Use a bucket to flush water.
If the water level is low after flushing,
add more water.
・
Prevents odors.
Attention!
◦
If there is a water supply failure, set "Auto flushing" to "OFF".
(Page 30)
◦
When water supply is restored, be sure to perform a full flush.
(To prevent waste from remaining in the discharge pipe.)
1
Newspaper, dustcloth,
etc.
Large bucket
Pour strongly,
aiming at the center
of the bowl unit.
2
■
The toilet can be flushed by the Flush button
on the top right corner of the toilet seat.
■
If the low battery warning LED is flashing, replace
the batteries.
■
R epl ac ing th e b atteries
Switch the breaker on the distribution board to OFF.
・
The "Power" LED goes off.
Remove the remote control from the hanger.
(Page 14)
Open the battery cover and replace two AA
batteries.
(Page 14)
・
The low battery warning LED goes off.
Mount the remote control in the hanger.
Switch the breaker on the distribution board to
ON.
・
The "Power" LED lights up.
Attention!
◦
"ON" and "OFF" settings of the functions such as the energy saver function may be canceled when the batteries are
replaced. Set them again.
Low battery
warning LED
1
2
3
4
5
<Power>
<Flush button>
B eep
If the water does not flow due to a water service interruption
If you cannot operate with the remote control