3
ENGLISH
3-3/4" [95mm] MAX.
2-1/2" [65mm] MIN.
FINISHED WALL
SURFACE
MIN./MAX.
MARKINGS
Screw
Plaster Guard
INCLUDED PARTS
* Actual product may vary in appearance depending on the model.
Check to make sure that all these parts were included in your packaging:
INSTALLATION PROCEDURE
1. Confirm that the valve has been
installed properly.
N OTE: The finished wall surface should
be between the min and max markings
on the plaster guard. See the TSMV
installation manual for further information.
Plaster Guard
Min./Max.
Markings
Finished
Wall
Surface
2-1/2” [65mm] MIN.
3-3/4” [95mm] MAX.
Screw
2. Remove the screw securing the
plaster guard to the valve body,
then pull the plaster guard outwards
to remove it.
Handle Assembly*
Escutcheon*
Threaded Extension
Adapter
Collar
Screw and Lock Washer
