6
3.3.2 Rear Panel
The figure below shows the rear panel of N300RU.
DC IN
The Power socket is used to connect power adapter.
WPS/RST
RST:
With the router powered on, press and hold the button for about 10
seconds, the router will reboot to factory default settings.
WPS:
If you have client devices you can press this button to quickly establish
secured connections between this router and client devices.
USB
This USB2.0 port is used to connect with USB devices.
WAN
This port is used to connect DSL/cable Modem, or Ethernet.
1/2/3/4 LAN
These ports connect to local PCs.
Note:
Press and hold the WPS/RST button for about 5 seconds, it is WPS working which will last for
2 minutes. For about 10 seconds, the router will reboot to default factory settings.
