![TotGuard T-266 User Manual Download Page 13](http://html1.mh-extra.com/html/totguard/t-266/t-266_user-manual_1139456013.webp)
Before riding, make sure to read carefully and fully understand the
User Manual.
Do not allow people who haven't carefully read and fully under-
stood the User Manual to use your E-bike.
Strictly comply with the age requirements that only people
between 12 and 60 may use the product and do not let those
people who out of that range ride your E-bike.
Pregnant women or people with physiological unfitness shall not
use E-bike.
When feeling unwell physically or mentally due to illness or under
the influence of medicine or alcohol, do not ride E-bike.
E-bike is designed for only one rider, and never try to ride double
or more, or ride the bike holding a child or load.
Before riding, make certain that both your physical and mental
conditions enable you to freely get on and off the bike and control
well, even without the help of others.
Assemble all components correctly and properly in strict
accordance with the assembly instructions in User Manual.
Improper assembly may bring risks of loss of control, collision, or
fall-off. When assembling the E-bike, take care to apply appropriate
force, as either screwing too tight or too light may cause damage to
the E-bike or malfunctions.Special note: do not conduct assembly or
service with the power turning on.
Do not try to modify or service E-bike by yourself or allow personnel
unauthorized to do the work. Should any problem happen, feel free
to contact us at any time, as this is your most reliable choice.
Before riding, always make certain that no abnormalities such as
loose parts, damage, or malfunctions existed on E-bike.
The front wheel is pneumatic. Charge pressure or tire pressure not
maintained properly may lead to travel instability or easy damage, or
even traffic accidents in extreme cases. Measure the tire pressure at
least once per month and measure it again before starting a
long-distance riding.
Should you spot any loose parts, damage, abnormality, or malfunc-
tion during the use of the E-bike, stop using it immediately and carry
out troubleshooting. Please repair regularly to avoid dangers.
Prior to charging the E-bike, make certain that the charging port is
dry and free from malfunctions and foreign objects. Only a correct
receptacle (100V-240V/50HZ-60HZ) can be utilized for charging.
When the E-bike is being charged, keep children and pets away and
make sure there are no inflammable materials nearby.
29.
30.
31.
32.
33.
34.
35.
36.
E-bike's battery must be stored in environments with a temperature
ranging from -20 to 45°C. Do not place E-bike where the tempera-
ture is over 45°C. When the ambient temperature falls below -20°C,
the battery will enter into a self-locked state and can't be charged or
used.
If that happens, bring E-bike to a warmer place firstly to unlock the
battery for further charging and using.
Should any leakage or other abnormalities (including breakage,
emission of odd smell or smog, overheat, etc.), stop using the
product immediately and prevent the battery from contacting other
objects.
Without permission, never try to open or disassemble the battery, or
perform any irrational operations on it or use it in an irrational way.
Depending on the battery state and environmental conditions, a fully
charged E-bike (the display screen showing 5 bars of power) will
have a standby time of approximately 180 days and a non-fully
charged E-bike (the display screen showing 1 bar of power) will
have a standby time of about 90 days. Bear this in mind to avoid
irreversible damage to the battery caused by failure to charge it
timely.
Do not wear high heels or other unsuitable shoes and too loose or
other unfit clothes when riding E-bike. Please always wear special-
ized protective gear when riding E-bike.
When you are to ride E-bike, it's strongly recommended that you
wear a pair of safety goggles, lest dirt, dust, or insects harm your
eyes or undermine your riding safety.
Never try to ride E-bike in rainy weathers or on wet roads, as wet
and slippery roads may reduce tires' resistance, lengthen the
scooter's braking distance, and may also lead to loss of control or
other accidents incurred by tire skidding.
Use a soft cloth to wipe and clean the E-bike body. Never try to flush
it with powerful water jets or a high-pressure hose. Nor shall you
immerse E-bike in water, otherwise dangers such as uncontrollable
malfunctions, abnormalities, or accidents may occur.
Never try to ride E-bike under adverse environmental conditions
such as bad weather, low visibility, poor illumination, etc., nor shall
you ride it when feeling exhausted.
Nights or other environments with poor visibility conditions make it
hard for riders, drivers, and pedestrians to notice each other in a
timely manner. therefore it's strongly recommended that you do not
ride the E-bike under the above-mentioned conditions to avoid
potentially serious dangers.
When riding, please keep an eye on the changes of the traffic and
surroundings, and please keep riding cautiously to avoid harm to
yourself and others.
Do not ride the Electric bike upstairs or downstairs, in an elevator,
go through a revolving door, or in any other adverse road conditions
or environments.
When riding, please be beware of the obstacles overhead.
During riding, if an abrupt slop suddenly appeared, an uneven road,
or any other terrain conditions you haven't met before, do not take
risks to ride through.
Do not try to turn abruptly at a high speed or brake suddenly on
slippery ground, as these kinds of actions easily lead the electric
bike to skid and out of control.
Please ride E-bike on bike lanes, and never ride on motor vehicle
lanes or any other inappropriate sites. strictly abide by traffic rules
and other related regulations. When approaching or passing a
crossroad, a motor vehicle lane, a bend, the spaces in front of a
gate, and so on, please slow down and pay greater attention to the
safety of the pedestrians.
During riding, please pay attention to nearby vehicles, pedestrians,
potholes, sewer covers, railroads, expansion joints, construction
areas on the road or sidewalk, debris, or other obstacles that may
pose a threat to your own and others' personal or property safety.
Never make or answer the phone or do any other things that may
let you be distracted, so that you can always concentrate on your
surroundings.
Ride on the designated bicycle lanes or close to the road edge
along the direction of traffic as allowed by local laws and regula-
tions, and never ride against traffic.
When you go out riding, do not break into other vehicles' or pedes-
trians' way.
When riding, do not put your hand on another vehicle and get
yourself dragged along. And avoid inappropriate behaviors like
performing stunts or X-sports, etc.
When you need to ride E-bike to a remote area, do not go alone.
Even if you have partnered on your journey, you'd better prepare for
potential risks.
E-bike is a personal travel tool made for short journeys, and shall
not be used for any other purposes such as goods delivery, etc.