TM-586 VA User’s Manual
7
F. SDRAM, Cache Memory Installation Procedures:
The Dual Inline Memory Module (DIMM) must be 3.3 Volt and
Unbuffered Synchronus DRAM (SDRAM) 8MB, 16MB, 32MB or 64MB.
The following illustration shows the type of DIMM Module.
168-PIN SDRAM DIMM Notch Key Definitions
Default setting: 3.3V.(Only)
First, verify the working voltage of
the EDO/SDRAM module in either
DIMM socket (DIMM1 or
DIMM2-table free).
You can set up the BIOS “Chipset
Feature Setup” to the best working
condition basing on the type of
EDO/SDRAM you are using.
