Totem T.R.U.C.K., Manual

Page: 11 / 44

8
In this step you will build the
wheel barrels. You start by putting
the 2 bearings onto the bearing
axle part (green in picture). The
wheel hex fi x (blue in picture) with
M4 lock-nut inserted, is put into
one barrel half. Then clamping the
2 barrel halves over the bearings
and wheel hex fi x.
E
3x
3x
M3 35mm bolt
3x
12mm Hex Wheel Fix
3x
Bearing Axle
6x
M8 16mm Bearing
6x
Bearing Barrel
9x
Lock nut M3
6x
M3 12mm bolt
OBS!:
Lock nut M4
OBS!:
Lock nut M3
3x
Lock nut M4
TIP:
To fasten lock nuts: First enter
nuts with fi ngers. Use either a
small fl at screwdriver or pliers to
help hold the nut.
Making the wheels barrels.
A
B
Sub-steps. First do
“A” then “B” , “C”
and so on.
OBS:
Many parts are
shown with
colors for clarity,
and are often
black in reality.