Totem Mini Trooper, Assembly Manual

Page: 3 / 44

It is a good idea to
start every step insert-
ing nuts into beams
(if the step requires).
Use the back of the screw-
driver to push in the nuts. After entering the fi rst slot,
nuts tend to tilt. Use your
thumb to push it back
straight, and then again
use the screwdriver to in-
sert the nut all the way in.
Some of the nuts are
missing threads. This is a
manufacturing issue and
we are working on it. In
the mean time, we add
few extra nuts. We apolo-
gize for the inconvenience.
Use Beam/Bolt ruler to
determine the length
of beams and bolts.
For more tips, please visit the link below:
https://totemmaker.net/blog/totem-mechanics-for-beginners/
STARTING TIPS
Inserting nuts (1) Inserting nuts (2) Faulty threads Ruler