background image

 

Totemacoustic.com 

 

Low Output 

 

Some sources can play louder than others, verify if all sources have the same output. 

 

Many sources, like phones or tablets, have their own volume controls.  Ensure their volumes are 

set to higher levels. 

 

Distortion, Poor Quality 

 

Bass and treble setting might be misadjusted, reset them to zero. 

 

Sources must be set to stereo or PCM, not a surround effect like Dolby or DTS. 

 

No Subwoofer Output 

 

Verify that the wire is securely connected.  If it is connected wirelessly, repeat the 

pairing.  

 

Make sure that the proper input is being used on the subwoofer. 

 

If the subwoofer is on and properly connected, increase its volume. 

 

 

The Bluetooth® word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc. and any use of such marks by Totem Acoustic 

Inc. is under license. Qualcomm aptX is a product of Qualcomm 

Technologies International, Ltd. Qualcomm is a trademark of 

Qualcomm Incorporated, registered in the United States and other 

countries, used with permission. aptX is a trademark of Qualcomm 

Technologies International, Ltd., registered in the United States and other 

countries, used with permission. 

This appliance is labeled in accordance with European Directive 2002/96/ EC 

concerning waste electrical and electronic equipment (WEEE). This label 

indicates that this product should not be disposed of with household waste. It 

should be deposited at an appropriate facility to enable recovery and recycling. 

Retain the sturdy carton and all packing material; all warranty repairs are required to be shipped in their original 

packaging.  This ensures no damage during transportation. Keep your original bill or receipt obtained from your 

Totem Authorized Dealer. We very much would appreciate if you took the time to register your product online. 

Product registration leads to quicker assistance and more efficient support in the rare case that your speaker 

should have a problem. This can be done quickly and easily in the support section of our site:  

https://totemacoustic.com/register-your-product/

 

All Totem products are created with the utmost care and quality in mind. If ever a problem should arise, Totem’s 

speakers are covered by 

a two (2) year limited warranty on the amplifier and 5 years on the drivers

,

 

starting from 

the date of purchase. The Totem limited warranty applies to products in normal home use only. The warranty is 

void if serial numbers have been altered or removed. The warranty is void if products show signs of abuse or 

tampering.  

Totem KIN Play Sound bar require 75-100 hours of actual music playing time as a minimal break-in period. During 

this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the 

cohesiveness of the music reproduction as this occurs. We reserve the right to any future change or modification 

without notice.  For further assistance, contact your TOTEM AUTHORIZED DEALER or visit 

the Warranty section of the Totem website at 

https://totemacoustic.com/warranty/

 

Follow and Like us on Facebook:  

https://www.facebook.com/totemacoustic/

 

TOTEM LIMITED WARRANTY 

Summary of Contents for KIN Play













Reviews: