2
ASSEMBLY INSTRUCTIONS
1. Place your pump inside the filter box, close to the center.
Make sure that the outlet points up. Route the cord through
the hole in the top corner of the filter box bottom. Fig. 1
NOTE: Pump is NOT INCLUDED. This filter is compatible
with pump models MD11300, MD11500, DD11210
DD11330 and DD11560.
Fig. 1
2. Place the bio-balls around the pump. Fig. 2
Fig. 2
3. Connect the extension tube to the outlet of the pump using
the adapter (adapter is part of fountain head kit). Fig. 3
NOTE: Fountain head kit (item #N6100) is NOT INCLUDED,
and is not required for operation.
Fig. 3
4. Place one of the fine filter pads over the bio-balls and pump.
Then place one of the coarse filter pads over the fine filter
pad. Fig. 4
NOTE: The fine filter pad is blue and the coarse filter pad is
black.
Fig. 4
Extension tube
Adapter
Pump
Pump
Filter box
bottom
Bio balls
Pump
Coarse filter pad
Fine filter pad
Filter box bottom
