2
ASSEMBLY INSTRUCTIONS
1. The adapters included can connect to 3/4 in. or 1 in. tubing.
For maximum water flow, it is recommended that the largest
tubing size for your pump is used. If using 3/4 in. ID tubing,
proceed to step 2. If using 1 in. ID tubing, cut the adapter as
shown using a hacksaw. Fig. 1
Fig. 1
2. Choose a location for your waterfall spillway,
consider your
view from indoors and outdoors. Measure out the distance
and height of where you would like the waterfall to be relative
to the edge of your pond. The important thing to remember is
that all the water coming out of the waterfall spillway must
stay within the pond liner to avoid water loss. Fig. 2
Fig. 2
3. Place the waterfall spillway in the place that you prepared for
it and check that it is level before burying. Fig. 3
Fig. 3
4. Connect tubing to the outlet adapter, then use hose clamp
hold it tight. Connect other side to your pump, and use hose
clamp hold it tight too. Once the tubing is securely
connected, place the pump inside you pond. Carefully cover
the waterfall spillway and tubing with natural material for a
professional look. Fig. 4
NOTE: Tubing, hose clamp, and pump are NOT INCLUDED.
Fig. 4
Cut ring