2
2. Connect the nozzle extension tubes to the swivel extension
tubes using connector. Fig. 2
Fig. 2
3. Choose a fountain head for the desired water effect, and
assemble your choice. Use adaptor (C.) and connector (F.)
as shown in Fig. 3
Fig. 3
4. If simultaneously running a second water feature and
fountain head from one pump, use the supplied stepped
adapter. If not, skip to step 6. Stepped adapter fits 1/2 in.,
3/4 in., and 1 in. ID tubing. For maximum water flow, it is
recommended to use the largest tubing size. If using 1/2 in.
ID tubing, proceed to step 5. If using 3/4 in. or 1 in. ID tubing,
cut the adapter as shown using a hacksaw. Fig. 4
NOTE: Tubing and Second water feature are NOT
INCLUDED
Fig. 4
5. Connect tubing to the diverter valve using the stepped
adapter. Connect the other end of the tubing to another
water feature. Fig. 5
NOTE: Tubing and another water feature are NOT
INCLUDED.
Fig. 5
Connect to
another water
feature
A
B
E
F
D
F
D
C
Cut ring
For 1 in.
tubing
Cut ring
For 3/4 in.
tubing
J
K
