8
9
Setting the Correct Mode and
Wattage:
The atomizer heads supplied with
the Optimus are compatible with
wattage mode only, and will not work
in temperature control modes. To
set the Optimus to wattage mode,
quickly press the power button 3
times to enter the mode selection
menu, the screen will begin to
flash, then keep pressing the right
adjustment button until the screen
displays power. Press the power
button once to confirm the selection.
Now adjust the wattage by pressing
the left or right adjustment buttons
until the screen reads 50w. Lower
wattage settings will give a cooler
and less dense vapour than higher
power settings, higher power
settings will produce larger clouds of
vapour but too much power can lead
to poor flavour, or even a burnt taste
in the vapour. Experiment to find
your own favourite setting which will
generally be between
30W and 80W
with the atomizer head supplied.
Tip: Long pressing either of the
adjustment buttons allows speedy
changes to the wattage.
Using Your Optimus Kit
Using Your Optimus Kit
Vaping:
Press and hold the power button as
you inhale the vapour. The green
indicator light will illuminate and the
screen will display a timer while the
power button is pressed.
Adjusting the Airflow:
If you find the airflow too airy or
too restrictive while vaping, it can
be adjusted by rotating the airflow
control ring located on the atomizer
base. Experiment to find your
preferred setting.
E-liquid Level:
To prevent the atomizer head
from becoming dry and burning
prematurely, ensure the E-liquid level
does not drop below half way down
the glass section of the tank.
Refilling the Tank:
To fill the tank, slide open the
top cap by pushing firmly in the
indicated direction to expose the fill
hole. Insert the filling nozzle into the
fill hole and fill the tank being careful
not to overfill. Slide the top cap shut
after filling.