6
7
Using your Forza 75
Using your Forza 75
Shift between VT/TCR/VW/Bypass/
Start/Clock Modes:
When powered on, press the power button
3 times consecutively, the first row will flash,
use the right adjustment button to cycle
through the VT/TCR/VW/Bypass/Start/
Clock modes.
VW and Start Mode:
When in VW or Start mode, use the right
or left adjustment buttons to increase or
decrease the level of wattage respectively.
The available wattage range is 1W – 75W in
increments of 1W. Start mode displays the
power level graphically, as well as showing
the usual maximum power level suitable for
the BF atomizer range.
VT Mode (Ni/Ti/SS316):
To shift between Ni/Ti/SS316, when in
VT mode press the power button 3 times
consecutively, the first row will flash. Press
the left adjustment button and the Ni/Ti/
SS316 symbol will flash. Use the right
adjustment button to shift between the
Ni/Ti/SS316 modes. When in VT mode,
use the right or left adjustment buttons
to increase or decrease the temperature
respectively. The available temperature
range is 100-315°C or 200-600°F and can
be adjusted in increments of 5°C and 10°F.
To adjust the wattage level whilst in VT
mode, press the power button 3 times
consecutively to activate the menu, press
the left adjustment button twice and the
wattage (PWR) value will flash, use the right
adjustment button to adjust the wattage
level.
To lock/unlock the atomizer resistance,
press the power button 3 times in quick
succession to activate the menu, press
the left adjustment button three times
and the atomizer value will flash, use the
right adjustment button the lock/unlock
the atomizer resistance. Note: Only lock
the atomizer when the coil is at room
temperature.
Note: If a coil with a resistance exceeding
1.5ohms is applied in VT mode, the device
will automatically switch to VW mode. Also,
if a standard kanthal coil is used under VT
mode, the device will automatically switch
to VW mode.
TW_Forza75_Manual.indd 6-7
16/06/2016 15:33
