13
In VW mode output wattage can be adjusted from 1W-60W by pressing the up button
to increase the power and pressing the down button to decrease the power. Pressing
and holding the up or down buttons will make the wattage setting rapidly increase or
decrease.
Please note in VW mode there will be no temperature protection. Please ensure
the power setting is suitable for the resistance of the coil fitted.
If the Curve VT60 is used in temperature controlled mode with coil material that is not
capable of temperature sensing, it will immediately drop back into VW mode. You may
need to reduce power using the down button to avoid burning your non-VT coil if this
happens.
Summary of Contents for Curve VT60
Page 1: ...USER MANUAL ...
