13
Using your arc pico grande kit
TCR Mode (M1/M2/M3):
To configure TCR modes M1, M2 and
M3, when the device is powered off,
hold the power button and the +/Up
button simultaneously until you enter
the TCR configuration menu. Use
the +/Up or –/Down buttons to cycle
through M1, M2 and M3 modes and
single press the power button to select
the mode that you wish to configure.
Use the +/Up or –/Down buttons to
increase or decrease the TCR value
depending on your choice of coil
material.
Hold the power button and the +/Up
button simultaneously to save any
changes and leave the configuration
menu.
Arc_Pico_Grande_Compliant_Manual.indd 13
22/03/2017 12:42
