Total TSSLI2001, User Manual

Page: 4 / 8

Blade replacement
When the moving blade no longer crosses the fixed blade in its entire length, or when
the electric trimmer can no longer have a clean cut after grinding, it is recommended to
replace the blade by following these steps:
1. More safety, before replacing the blade, make sure the pruning shears are turned
off and the power cord is disconnected from the battery.
2. See the diagrams below for the procedure to replace the blade.
3. Clean the blade after replacing it, connect the power cable to the battery, power
on to test the blade, raise the blade to complete the whole procedure.
Fixed and moving knives can be replaced individually; Don't worry about the size of the
replacement blade opening, the opening will automatically return to normal lock during power
on after the blade replacement is completed.
Operating precautions
Use and care of pruning shears
1. Do not cut branches beyond the specified diameter indicated, do not cut hard
items such as metal, stone or any other non-vegetable material. If the blades are
worn or damaged, replace them.
2. Keep the pruning shears clean, use a clean cloth to clean the pruning shears,
baltery and charger (do not use any abrasive or solvent-based cleaning agents),
use a soft or dry brush to clean the dust on the pruning shears. prune head
3. Do not immerse the pruning shears, battery or charger in any liquid.
4. Follow the instructions given for proper use of the pruning shears, do not use the
pruning shears when the tool, battery or charger is damaged.