Total TS42142101, Manual

Page: 13 / 18

9. Remove the flat washer, outer blade washer and blade (fig. V).
10. Clean the inner blade washer and the outer blade washer where they contact the
blade with a drop of oil.
11. Fit the new blade onto the shaft taking care that the inner blade washer is behind
the blade (fig. W).
Caution
To ensure proper blade rotation, always install the blade with the blade teeth and the
printed arrow on the side of the blade pointing down. The direction of blade rotation is
also marked with an arrow on the upper blade guard.
12. Replace outer blade washer.
13. Depress shaft lock button (26) and replace flat washer and blade bolt.
14. Use the 6mm hex key to tighten the blade bolt securely (tighten
counterclockwise).
15. Lower the blade guard, hold the rotating lower blade guard (12) and blade bolt
cover (14) in position and tighten the set screw to secure the blade bolt cover in
position .
16. Replace the guard retraction arm (6) and secure it on the rotating blade guard
(5).
17. Check that the blade guard works properly and covers the blade while the saw
arm is lowered.
18. Plug the saw into the power source and run the blade to make sure it is working
properly.