7
Set up
Attention
Before installing, repairing or maintaining the appliance, always turn off the operation
switch and unplug the mains plug.
Before initial operation, check whether the nominal frequency of the mains corresponds
to the data of the type of place.
Mounting
Replacement and installation of the saw blade
When mounting the saw blade, wear protective gloves, as there is a risk of injury from
touching the saw blade.
When changing the saw blade, take care that the saw blade holder does not have
material residues.
Inserting the saw blade
Turn the locking sleeve 4 approx. 90 ° in the direction of the arrow and hold it down. Push
the saw blade into the saw blade holder. Release locking sleeve 4 again.
Checking the seat of the saw blade holder
The loose saw blade can fall and cause injury. For certain jobs, the saw blade can also
be rotated 180 ° (teeth up) and reinserted.
Remove saw blade
Turn the locking sleeve 4 approx. 90 ° in the direction of the arrow and hold it down.
Remove the saw blade.
Dust and chip extraction
Material dusts can be harmful to health. Touching or inhaling the powders can cause
allergic reactions and / or cause respiratory infections in the user or bystanders.
Certain powders are considered carcinogenic, especially in relation to wood treatment
additives (chromate, wood preservative).
Materials containing asbestos can only be handled by specialists.
•
Ensure good ventilation of the workplace.
•
Observe the relevant regulations of your country for the materials to be worked
on.
•
Avoid accumulation of dust in the workplace. Powders can easily ignite.
