Total TL1108236, Manual

Page: 8 / 10

8
Depending on the bevel width required, use the corresponding V-groove. To do this,
place the brush with the V-groove on the edge of the workpiece and guide it along the
edge.
Planning with parallel guide
•
Mount the guide parallel to the machine using the fixing bolt. Depending on the
application, mount the recess depth stop with attachment bolt to the machine.
•
Loosen the set bolt and adjust the rebate width requested on the scale. Retighten
the fixing bolt.
•
Set the required rebate depth in accordance with the rebate depth stop. Perform
the brushing procedure several times until the required recess depth is reached.
Guide the tool by applying lateral support pressure.
Maintenance and troubleshooting
Maintenance
Your power tool has been designed to operate for a long time with minimal maintenance.
Continued satisfactory operation depends as much on proper care and use of the tool
as it is on periodic cleaning and maintenance.
Lubrication
Your power tool does not require additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly wipe the case with a soft cloth.
Note: Make sure the tool is unplugged before performing any maintenance.