Total TH215002, Manual

Page: 8 / 11

8
Setting up
Verify that the mains voltage is correct. The power supply voltage
must match the voltage specified on the rating plate of the power
tool.
• To turn on the power tool, press the switch in the direction
of the arrow "I".
• To turn off the power tool, press the switch in the direction
of the arrow "0".
• The power tool reaches maximum impact speed after a
certain time to ensure the correct temperature of the power
tool.
•
This start-up time can be shortened by lightly tapping the
chisel of the power tool on the ground once.
Impact speed adjustment
The electronic control allows a continuous preselection of the speed according to the
material on which to work. The constant electronic control keeps the preselected impact
speed almost constant between loading and unloading conditions.
Select the impact speed with the speed adjustment function knob 10 according to the
material.
The data in the following table are recommended values.