SPECIFICATIONS
GENERAL SAFETY RULES
(For All Tools)
WARNING! Read and understand all instructions.
Failure to follow all instructions listed below, may result
in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS.
Work Area
1.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away
while operating a power tool.
Distractions can
cause you to lose control.
Electrical Safety
4.
Double insulated tools are equipped with a
polarized plug ( one blade is wider than the
other.) This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in any
way.
Double insulation eliminates the need for
the three wire grounded power cord and grounded
power supply system.
5.
Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of
electric shock if your body is grounded.
6.
Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
7.
Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords
immediately.
Damaged cords increase the risk of
electric shock.
8.
When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W".
These cords are rated for outdoor use and reduce
the risk of electric shock.
Personal Safety
9.
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use tool while tired or under the
influence of drugs, alcohol, or medication.
A
moment of inattention while operating power tools
may result in serious personal injury.
Model No.
TG1241806
UTG1241806
Rated voltage
Rated power input
No-load speed
Disc diameter
Spindle thread
220-240V~50/60Hz
2350W
8000/min
180mm
M14
220-240V~50/60Hz
2350W
8000/min
180mm
M14
110-120V~50/60Hz
2350W
8000/min
7˝
5/8˝-11UNC
Model No.
TG1241806-6(ISRAEL Plug)
Rated voltage
Rated power input
No-load speed
Disc diameter
Spindle thread
220-240V~50/60Hz
2350W
8000/min
180mm
M14
TG1241806-8(BS Plug)
220-240V~50/60Hz
2350W
8000/min
180mm
M14
TG1241806S (SAA Plug)
220-240V~50/60Hz
2350W
8000/min
180mm
M14
6
TG1241806-4(IRAM Plug)
