Standard Handset Wiring Installation
1. Unplug the handset / headset cord from your telephone and plug it
into the Headset jacks on the TR-LP-A
2. Using the short cable which was supplied with the TR-LP-A, plug
the RJ11 (4P4C) into the handset jack on your phone and the
other end RJ12 (6P4C) of the cable into the Phone jack on the TR-
LP-A. Your telephone should now function normally as you have
simply connected a short extension into the handset cord.
3. Plug the AC adapter into the "Power (12vDC)" jack and AC power.
4. There are two small screwdriver adjustable controls on the TR-LP-
A One adjusts the level of microphone audio output (up to 30db
gain), and the other adjusts the earpiece audio (up to 10db gain).
Adjust clockwise to decrease. anti-clockwise to increase the output
level as needed.
NON Standard Handset Wiring Installation
1. Unplug the handset / headset cord from your
telephone and plug it into the Headset jacks
on the ‘Handset Splitter’
2. Plug the short cable from the Splitter into the
handset jack on your phone. Plug the handset
curly cord into the Splitter Headset socket.
Plug the short cable that came with the TR-
LP-A into the Logger socket of the Splitter and
other end RJ12 (6P4C) into the Phone jack on
the TR-LP-A. Your telephone should now
function normally as you have simply
connected a short extension into the handset
cord.
3. Plug the AC adapter into the "Power (12vDC)"
jack and AC power.
4. There are two small screwdriver adjustable
controls on the TR-LP-A One adjusts the level
of microphone audio output (up to 30db gain),
and the other adjusts the earpiece audio (up to
10db gain). Adjust clockwise to decrease. anti-
clockwise to increase the output level as
needed.
Note
If the Handset / Headset curly cord is plugged into the ‘Logger’ socket of the ‘Splitter’ the Handset / Headset
will NOT work.
www.totalrecall.com.sg
