Total Gym LEVATE Core ADJ Owner'S Manual Download Page 9

9

ELEVATE

®

 CORE ADJ

TM

 OWNER’S GUIDE

MAINTENANCE / START

MAINTENANCE & CARE

Your Total Gym ELEVATE Core ADJ will 

offer you or your facility and your clientele 

years of easy operation if you follow these 

simple tips for maintenance and care. 

With periodic cleaning, moving parts and 

rolling surfaces will maintain their smooth 

function. The ELEVATE Core ADJ is not 

safe to use if it is not maintained regularly 

as follows. Clean rail surfaces on a regular 

basis with a noncorrosive cleaner like 

soap and water or waterless cleaner or 

just wipe clean with a dry towel. Some 

black powder residue is normal on the 

inside of the rails. All other parts can be 

cleaned the same way or antibacterial 

wipes may be used. If your ELEVATE Core 

ADJ is damaged, please discontinue use 

until defective components are repaired. 

Please pay special attention to the 

following wear items: rollers, cables and 

handle grips.

CAUTION!

 DO NOT USE ANY LUBRICANTS 

OR SILICONE-BASED PRODUCTS on the 

rails or wheels. This will cause the wheels 

to slide rather than roll and will damage 

the wheels. You can clean the glideboard 

material with a non oil-based window 

cleaner. DO NOT USE ARMOR ALL

®

 OR 

LIKE SUBSTANCES. These will make 

the glideboard slippery. Wipe down your 

ELEVATE Core ADJ with a clean cloth.

MAINTENANCE SCHEDULE

DAILY

1.    Wipe down all padded surfaces 

with antibacterial cleanser after 

each use.

2.    Move the glideboard up and down 

rails to ensure smooth rolling. If 

glideboard does not roll smoothly, 

clean rails and wheels thoroughly.

WEEKLY

1.    Wipe down rails with a non-

corrosive, no alkaline, no alcohol 

cleanser.

2.    Clean all surface areas for 

aesthetics.

3.    Check all screws and fasteners to 

ensure they are installed correctly 

and tightened.

4.    Check all pads, fabric or foam for 

punctures or wear and replace as 

needed.

MONTHLY

1.    Visually inspect the rollers. Clean 

any debris accumulated on the 

roller.

2.    Inspect rubber stoppers, bungee 

and computer.

GETTING STARTED

As a facility offering the use of a ELEVATE Core ADJ to customers, or as a personal user 

of the product, you – the owner of the product – assumes the responsibility to become 

familiar with the guidelines relative to safe use of the product and to convey these 

guidelines to all users. Read all safety, warnings and usage instructions before using the 

ELEVATE Core ADJ. Care and maintenance for this product are included to promote safe, 

enjoyable and prolonged use of this equipment.
When using your ELEVATE Core ADJ, wear athletic shoes and comfortable lightweight 

clothing. Before you begin, check to ensure that all parts are in place and working 

properly. Remember to control the glideboard at all times, particularly when getting on or 

off your ELEVATE Core ADJ. 

WARNING

Always control the glideboard while using your Total Gym 

ELEVATE Core ADJ. ELEVATE Core ADJ is rated 

at a maximum user weight capacity of 400 lbs [181 kg]. 

Summary of Contents for LEVATE Core ADJ













Reviews: