TM2321R – TM2325R
STEP-BY-STEP ASSEMBLY
3
#0964-3150
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.
3594.TM2321/TM2325.9/25/18
Position
Right End (2)
on top of assembly, so
dowels on
Front (5)
,
Top (4)
,
Support (3)
and
Shelf (6)
align with holes on
Right End (2)
. Press
firmly into place.
STEP
3
Secure
Right End (2)
to
Front (5)
,
Top (4)
,
Support (3)
and
Shelf (6)
with five
Confirmat
Bolts (7)
, using the included
Hex Wrench
.
STEP
4
Lay
Left End (1)
flat on floor, with side having the
most holes facing up.
STEP
1
Insert dowels on
Front (5)
,
Top (4)
,
Support (3)
and
Shelf (6)
into holes on
Left End (1)
.
Make
sure raw edges are not exposed, and wire cutouts
are oriented correctly, as shown. Make sure four
holes on face of
Front (5)
align with holes on edge
of
Top (4)
, and four holes on face of
Support (3)
align with holes on edge of
Shelf (6)
(reference
DETAILS A & B
)
. Press all parts firmly into place.
STEP
2
wire cutouts
NOTE: Wire cutouts on
Support (3) are not visible
– reference exploded view
on page 2.
DETAIL B
DETAIL A