TM2224R – TM2226R
STEP-BY-STEP ASSEMBLY
3
#0964-3132
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.
3594.TM2224/TM2226.11/1/18
Lay one
End (2)
flat on floor, with side having the
most holes facing up.
IMPORTANT: Edgebanding
seam must be on the bottom of the unit when
assembly is complete.
STEP
1
Insert dowels on
Top-Bottoms (1)
into the upper,
lower and center sets of holes on
End (2)
. Press
firmly into place.
STEP
2
Insert dowels on
Backs (3)
into the remaining
holes on
End (2)
, between
Top-Bottoms (1)
.
Press firmly into place.
STEP
3
Position other
End (2)
on top of assembly, so
dowels on
Top-Bottoms (1)
and
Backs (3)
align
with holes on
End (2)
. Make sure edgebanding
seam on
End (2)
is facing bottom of unit.
Edgebanding seam on both
Ends (2)
must be
facing same direction.
Press firmly into place.
STEP
4
Secure
End (2)
to
Top-Bottoms (1)
and
Backs (3)
with eight
Confirmat Bolts (4)
, using the included
Hex Wrench
.
STEP
5