12
Pressing this button in COOL or DRY mode, the icon " " is displayed and the
indoor fan will continue operation for a few minutes in order to dry the indoor unit
even though you have turned off the unit. After energization, X-FAN OFF is
defaulted.X-FAN is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
●
Having set X FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for about a few minutes. at low speed.
In this period, press X-FAN button to stop indoor fan directly.
●
Having set X FAN function off: After turning off the unit by pressing ON/OFF
button, the complete unit will be off directly.
X-FAN button
13
button
Press this button to achieve the on and off of healthy and scavenging functions in
LCD displays " ". Press the button for the second time to start healthy and
scavenging functions simultaneously; LCD displays " " and " ". Press this
button for the third time to quit healthy and scavenging functions simultaneously.
Press the button for the fourth time to start healthy function; LCD display " ".
Press this button again to repeat the operation above.
This function is applicable to partial of models.
●
Press this button to set clock time. " " icon on remote controller will blink. Press
▲
"▲" or " " button within 5s to set clock t
im
e. Each pressing of "▲" or " " button,
▲
clock time will increase or decrease 1 min
ute. If hold "▲" or " " button, 2s late
▲
r,
time will change quickly. Release this button when reaching your required time.
Note:
Clock time adopts 24-hour mode.
●
●
The interval between two operation can’
t exceeds 5s. Otherwise, remote contro-
ller will quit setting status. Operation for T-ON/T-OFF is the same.
CLOCK button
11
SLEEP button
Under COOL, or HEAT mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
function and " " icon will disappear.After powered on, Sleep Off is defaulted. After
the unit is turned off, the Sleep function is canceled.
In this mode, the time of time can be adjusted. Under Fan DRY and Auto modes,
this function is not available.
10
Floor Ceiling Type Unit
8
Summary of Contents for TM09HBTDI
