09
7
When the unit is running, press this button to schedule when the unit will power off
by using the +/- button to adjust the length of time before powering off. When the unit
is not running, press this button to schedule when the unit will power on by using the
+/- button to adjust the length of time before powering on.
Press the timer button a
second time to confirm the timer setting. If you have confirmed a time setting, you can
press this button again to cancel the timer mode.
Timer Button
8
Pressing this button will use a sensor located in the remote control to determine the
temperature setting of your air conditioner. The remote controller will send a
temperature update to the air conditioner every 10 minutes for better accuracy in
your room. If the air conditioner does not receive an update from the remote control
after 11 minutes, it will revert to using a sensor on the air conditioner itself to adjust
the temperature settings. In the case of a power outage, this setting will not be saved.
You will need to manually reset the
I Feel
mode after a power outage.
“I Feel” Button
9
Press this button to turn off the lights on the display panel of your air conditioner.
Press the button again to turn the light back on.
Notice: Change Between °F and °C
With the remote powered off, press the Mode and “-“ buttons simultaneously to switch
between Fahrenheit and Celsius displays.
Light Button
Replacing the Batteries
1. Press the back side of the remote
control battery cover and slide out
following the engraved arrow.
2. Replace with two new AAA (1.5V)
batteries of the same make and
model. Make sure the polarities
(+ & -) are aligned correctly.
3. Reinstall the battery cover box.
