TOSO Mytec 01 Loop Double Type, Instruction Manual

Page: 8 / 10

P. 1 4
(5)How to remove the screen
1) Pull down the screen 5 and 10 cm and stop
it.
2) Rotate the dial of Side Holder on the oppo-
site side the chain until it stops in the
“OPEN” direction.
3) Remove a roll screen body slowly with both
hands. Remove the cover and Link Joint Pin
of the link section, and then remove the
screen, while taking care that neither the
screen nor the chain drops.
* Remove the screens one at a time.
P. 1 5
<Link Type>
■ How to close a screen
● Pull the back side of Ball Chain downward.
■ How to open a screen
● Pull the front side of Ball Chain downward.
How to Operate
<Installation and Detachment of a Double Type / Link Double Type>
Caution
Make sure to pull Ball Chain slowly when using the product. If Ball Chain is pulled quickly,
the product may not roll up properly.
Please do not hang from Screen or Ball Chain. The product may fall down.
■ How to close a screen
●
To lower the screen on the room side, pull
down the front Ball Chain.
● To lower the screen on the window side,
pull down the rear Ball Chain.
■ How to open a screen
●
To raise the screen on the room side, pull
down the rear Ball Chain.
● To raise the screen on the window side, pull
down the front Ball Chain.
Room side
Window side Room side
Window side
Pull Pull
Pull Pull Pull Pull