■
Installation Type
■
Installation Diagram (mm)
* In the case of a bay window, only the ceiling attachment is available.
* Place the fixing screw in either of the position shown above, according to the condition of the
underlying backing material.
* Fasten the front attachment of a product exceeding 2,010 mm in width through the upper screw
hole in the bracket.
■
Position of Bracket
●
Install the brackets on both sides
approximately 10 cm from both ends of the
head rail using fixing screws (pan-head,
∅
3.5 ×
20).
Product Width (mm)
Number of Bracket
~ 1200
2 pcs.
~ 2000
3 pcs.
~ 2400
4 pcs.
* In the case of a product of 1,210 mm or more
in width, three or more brackets will be required.
Install them at even intervals.
■
How to attach and detach a head rail
〈
Attaching
〉
1 Hook a head rail on temporal hook of bracket.
2 Push main body into the bracket until it firmly
fixed.
〈
Detaching
〉
1 Pull out a head rail while pressing release
button of bracket.
2 Take main body off from temporal hook of
bracket.
Installation and Detaching
The attached screw for installing the bracket is for xylem section. Please do
not use other than xylem section.
ATTENTION
〈
Ceiling Attachment
〉
〈
Front Atta
〈
Front A
Fixing Screw
Fixing Screw
〈
Front Attachment
〉
〈
Front A
Fixing Screw
After installing the brackets, check
to ensure that they are fastened
securely to the main body.
CAUTION
-12-
-13-
