14
Load the hook
Most of the time, it is very easy to load the hook. Just insert your
hook or line (through the pin) to the hook holder will be ok.
Some times, if the hook is too bigger to be easily inserted in the
hook holder, you may need the following steps:
a) Push and hold the left hand joystick down, the pin will withdraw.
b) Put your line(s) or hooks in the hook holder.
c) Release the left joystick. Then the pin will extend out to catch
the hook or lines.
Release the hook
Push the left hand joystick down will release the hook.
Pin
Hook holder
Load and release the hook
The left hand joystick is used to load and
release the hook.
Note:
to protect the magnet inside the boat, maximum
releasing time is 5Sec. The pin will back automatically after 5s.
