5-1
T
ROUBLESHOOTING
Chapter 5
Troubleshooting
This chapter provides information on restoring your Wireless Routing Center to
proper working order if there appears to be a problem. Refer also to your computer
user’s manual.
Power
The
Power
indicator does not light when the power switch is pressed.
Cause
No power is supplied to the Wireless Routing Center.
Remedy
Check the connection of the power cord and AC adapter.
Ethernet
The corresponding Ethernet indicator does not glow when an Ethernet cable is
connected.
Cause
The cable is not properly connected.
Remedy
Setting up the Ethernet/Wireless LAN client
Chapter 3, Setup, and reconnect the cable.
Cause
The cable is inappropriate.
Remedy
Setting up the Ethernet/Wireless LAN client
Chapter 3, Setup, and make sure you are using the proper cable.
Configuration window
The Configuration window does not open, even if the IP address of the Wireless
Routing Center is entered in the address box of the browser.
Cause 1
The local IP address of the Wireless Routing Center may be wrong.
Remedy
The default local IP address is 192.168.10.1. If it has not been
changed, specify this address.
If the local IP address has been changed in
LAN CONFIGURATION
,
or if a local IP address different from the default address has been set
in the Wireless Routing Center because a DHCP server other than the
Wireless Routing Center is in the LAN, enter the set local IP address in
the address box of the browser.
