Using Wireless Card Manager
13
Step 1. Select 64 bit or 128 bit in the Encryption field.
Step 2. Select ASCII or Hex in the Key Type field.
Step 3. In the Default Key field, select one number to use as the default key from the
drop-down menu.
Step 4. Manually type in a string of characters in the corresponding Key # field that you
have selected in step 3.
Step 5. Click Apply changes to allow the settings to take effect.
Note:
When setting up WEP without using the Passphrase function, if the Key Type is set to
Hex, only hexadecimal characters (range: 0~9 and A~F) can be used. When Encryption
is set to 64 bit, 10 Hex characters can be entered in the Key field. And for 128 bit
Encryption setting, a maximum of 26 Hex characters cna be entered to generate the key
string. If the Key Type is set to ASCII, and Encryption is set to 64 bit, then 5 ASCII
characters can be used in the Key field. And for 128 bit Encryption, 13 ASCII characters
can be used.
BENQ.book Page 13 Friday, July 4, 2003 7:49 PM
