Toshiba W-808 Owner'S Manual Download

Page: 12 / 52

S-VIDEO Connection

The S-VIDEO jack is also available to connect to your TV.

This set-up will enable you to:

– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching

another (only when you connect a cable-
compatible TV).

You will need to:

• select TV channel 3 or 4 to receive video

signals. (See page 11.)

• to record a channel while watching another,

press

TV/VCR

on the remote control to turn off

the “VCR” indicator in the VCR display and
select a desired channel on the TV (only when
you connect a cable-compatible TV).

This set-up will enable you to:

– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching

another (scrambled or unscrambled).

You will need to:

• set TV channel to the output channel of the

cable box.

• turn on the cable box and select cable channel 3

or 4 according to the output channel of the VCR.

• to record a channel while watching another,

press

TV/VCR

on the remote control to turn off

the “VCR” indicator in the VCR display and
select a desired cable channel on the cable box.

Connections (continued)

Incoming cable

Cable Box

Incoming cable

OUT

Cable Connection

Choose one of the below according to your usage of the cable box.

S-Video Cable
(supplied)

Audio/Video Cable
(supplied)

When connected your TV using the
S-VIDEO OUT jack

To watch video pictures, set the video input mode
on your TV. For the video input mode, refer to the
manual of your TV.

Summary of Contents for W-808





















































Search results

Summary of Contents for W-808

Reviews:

Related manuals for W-808

Brands by name

Popular brands

Toshiba W-808, Owner'S Manual

Search results

Summary of Contents for W-808

Reviews:

Related manuals for W-808

Brands by name

Popular brands