background image

25

RECORDING

Timer Programming Procedure

Example: To record cable channel 25 in the SP tape speed from
9:20 p.m. until 10:00 p.m. on August 30.  Today is August 25.

1

Load a cassette with the safety tab attached.

2

Press 

PROG. to display the MENU screen.

3

Select “PROGRAM” using 

FF or

REW, and press ENTER.

4

Move to the next using 

FF, and

select the channel number 25 by
pressing

 number buttons 2 and 5,

PLAY/x2  or STOP.

• To record a cable program from the connected cable box:

Enter the cable channel number by 

number buttons, PLAY/x2 or

STOP.

• You can make “L1” or “L2” appear on the channel number position

by pressing 

I.SELECT depending on your connection.

   (See pages 8 and 12 ).

To make corrections:
Press 

REW to move back to the item, or FF to forward.

(Continued)

Timer Program Recording

The programmable timer allows you to record up to 6 different programs over one month.

Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Make sure that the clock is set correctly (page 15).
• Store the channels on the VCR (pages 16 and 17).

RECORDING

10

PROG.

ENTER

SLOW

PLAY/x2

PAUSE/STILL

REW

F F

CURSOR

STOP

1

2

3

4

5

6

7

8

9

CANCEL

A.SELECT

EJECT

VC-618

0

100

1

2

3

4

5

6

7

8

9

0

100

2,9

STOP

CURSOR

Number 
buttons

ENTER

FF

PLAY/x2

REW

STOP

W-714/Eng (24-28)

1/2/02, 10:47 AM

25

Summary of Contents for W-714



































Reviews: