Toshiba W-609 Owner'S Manual Download Page 38

Page: 38 / 47

DSS

Satellite Receiver Set-up (continued)

VCR display

Select “CONTROL” using PLAY or STOP, and set to “O

” or

“OFF” using FF or REW.

: if your DSS

satellite receiver is

remote-controllable.
• Satellite channels will be selected by

CH (CABLE BOX) on the remote
control.
The VCR can change the satellite
channel to the desired one when timer
recording starts.

→

Go to step 7.

OFF: if your DSS

satellite receiver is

NON remote-controllable.
• Satellite channels will be selected by

the own channel selector of the DSS

satellite receiver.
The VCR channel should be set to the
output channel of the DSS

satellite

receiver.

→

Go to step 8.

Select “BRAND TYPE” using STOP, and enter a brand code
of your DSS

satellite receiver using number buttons. Refer

to the table on the next page.

Example: For a TOSHIBA DSS

satellite receiver, identified by

number 99.

Make sure that the background of the above display has changed to
the satellite program on channel 200. If not, relocate the DSS

satellite receiver on the VCR so that it can receive the infrared signal.

Press PROG. three times to exit.

Notes
• If your satellite channel does not change to 200 in step

, the DSS

satetllite

receiver will not be able to change channels in the timer recording. In this
case, set “CONTROL” to “OFF” in step

• The C system recording is not available on satellite channels.
• The DSS

satellite receiver control is not compatible with the cable box

control.

D : PROG

SET UP

PRESET

PROGRAM

USE no c. Box DSS

OUTPUT CH 3CH

TROL Off on

BRA

D TYPE no. 36

D : PROG

SET UP

PRESET

PROGRAM

USE no c. Box DSS

OUTPUT CH 3CH

TROL Off on

D : PROG

SET UP

PRESET

PROGRAM

USE no c. Box DSS
OUTPUT CH 3CH
CO

TROL Off on

BRA

D TYPE no.99

SENDING A TEST SIGNAL

TO YOUR CABLE BOX

W-609/TSB DRAFT(24-40)01

26/11/99, 8:21 PM

Summary of Contents for W-609
















































Search results

Summary of Contents for W-609

Reviews:

Related manuals for W-609

Brands by name

Popular brands

Toshiba W-609, Owner'S Manual

Search results

Summary of Contents for W-609

Reviews:

Related manuals for W-609

Brands by name

Popular brands