Toshiba W-604 Owner'S Manual Download Page 4 | Manualshive

Page: 4 / 35

background image

4

1.

Read owner’s manual
After unpacking this product, read the owner’s manual carefully, and follow all
the operating and other instructions.

2.

Power Sources
This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company. For products
intended to operate from battery power, or other sources, refer to the operating
instructions.

3.

Grounding or Polarization
This product may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.

4.

Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have
been adhered to.

5.

Heat
The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.

IMPORTANT SAFETY
INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS

GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT.
RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can
result in electric shock or fire hazard. The safeguards incorporated in this unit will protect
you if you observe the following procedures for installation, use and servicing. This unit is
fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
ONLY.

W-604 01 ENG

2/12/01, 2:20 PM

4

«
...
2
3
4
5
6
...
»

Summary of Contents for W-604




































Reviews:

No comments

Related manuals for W-604

Brand: Sylvania Pages: 8

Brand: Daewoo Pages: 71

Brand: RCA Pages: 59

Brand: 1RT Pages: 8

Brand: Quasar Pages: 40

Brand: Emerson Pages: 72

Brand: Philips Pages: 31

Brand: Philips Pages: 2

Brand: Philips Pages: 72

Brand: Philips Pages: 84

Brand: Philips Pages: 2

Brand: Philips Pages: 28

Brand: Philips Pages: 56

Brand: Philips Pages: 29

Brand: Philips Pages: 36

Brand: Philips Pages: 9

Brand: LG Pages: 16

Brand: GE Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands