32
The remote control does not work
properly.
• The batteries are exhausted.
– Replace all batteries. (page 11)
• The remote control is operated beyond the
operating range.
– Make sure the remote control is within 30
°
of
the remote sensor on the VCR. (page 11)
• Too far from the VCR.
– Use the remote control within 7 m from the
front of the VCR. (page 11)
• An obstacle may be in the way of the operation.
– Remove the obstacle.
• The operating mode of the remote control is not
set correctly.
– Press
VCR or TV depending on the
equipment you want to operate. (pages 15, 30)
The cassette is ejected immediately
after it is loaded.
• The cassette was inserted with the label side
not paralleling the compartment.
– Reload it carefully. (page 19)
The cassette does not go into the
cassette compartment.
• There is already a cassette in the VCR.
– Eject the cassette and reload the new one.
(page 19)
W-528 522 422 eng (30-36)
2/28/02, 2:33 PM
32
