manualshive.com logo in svg

Toshiba VTW2185, User Manual

Share
Download
Toshiba VTW2185 User Manual Download Page 28

26

NOTE:

TO STOP RECORDING TEMPORARILY

TO STOP RECORDING

Press the STOP button to stop recording.
"   " will appear on the screen.

Press the REC buttons.
"   " and the channel number will appear on the
screen and the REC indicator will light.
While the unit is recording the one programme,
another programme can be seen on this unit.
After the recording, select the TV channel you
want to watch.

AUTO REWIND FEATURE:
This feature is disabled during OTR and TIMER REC.

•

If the tab has been removed, the tape will eject whenever REC is pressed.

CH  3
CH  2

Recording(RED)

Watching(GREEN)

•

To prevent damage to the video head and video tape the pause function will stop the VTR operation after
about 5 minutes.

NOTE:

Press the PAUSE/STILL button to stop recording of unwanted material. "     " will appear on the screen and the REC
indicator will blink on and off.
Press the button again or press the REC buttons to continue the recording.

CH  2

5

  5G00101A[E] P26-37

26/03/2003, 15:00

26

Summary of Contents for VTW2185

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands