4
Installation
Before Using
●
Do not place the washing machine in the porch or
yard where it can be exposed to water and in the
bath room where humidity is high.
This may cause fire and electric shock due to the electric
leakage.
●
Place the washing machine on the stable and leveled
floor.
Do not place the washing machine on the blocks, bricks
and other unstable surfaces.
This may cause the vibration and noise to increase.
Correct
Incorrect
Incorrect
●
Do not install in direct sunlight
The plastic part may be discolored or deformed.
●
Place the washing machine where water can be
drained properly.
This may cause fire and electric shock due to the electric
leakage caused by poor drainage.
●
Leave space of 5 cm or more between the wall and
the washing machine (distance from the back and
the left and right sides). Leave space of 5 cm or
more from the faucet.
This may cause an abnormal vibration and noise.
●
If you install the washing machine on the carpet,
make sure the holes in the bottom of the washing
machine are not blocked.
This may cause malfunction.
Install the water supply hose.
Insert the water supply hose into the water inlet
securely.
Lay the drain hose to allow for drainage.
Place the drain hose at no higher than 15 cm from the
floor.
15cm
* The drain hose can be extended up to 3 m on the flat
surface.
Insert the power plug into the wall outlet.
1
2
3
131030c1̲VH-B1100WB̲Asia.indd 4
13/10/30 15:25
