manualshive.com logo in svg

Toshiba U300 Series, User Manual

Share
Download
Toshiba U300 Series User Manual Download Page 45

User’s Manual

3-9

Getting Started

1. Load the Recovery Discs into the optical disc drive and turn off the 

computer's power.

2. While holding down 

F12

 key on the keyboard, turn on your computer - 

when the 

In Touch with Tomorrow TOSHIBA

 logo screen 

appears, release the 

F12

 key.

3. Use the left and right cursors key to select the CD-ROM icon from the 

menu. Please refer to the 

Boot Priority

 section in Chapter 7, 

HW Setup

  

for further information.

4. A menu will be displayed from which you should follow the on-screen 

instructions.

5. If your computer came with additional software installed, this software 

can not be recovered from the Product Recovery DVD-ROM. Re-install 

these applications (e.g. Works Suite, Games, etc.) separately from 

other media.

When you reinstall the Windows operating system, the hard disk will be 

reformatted and all data will be lost.

Summary of Contents for U300 Series




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands