2
Part names
1
BASS button
2
USB CHARGE port
3
3.5mm AUX INPUT jack
4
6.3 mm MIC 1 jack
5
6.3 mm MIC 2 jack
6
USB port
7
POWER switch
8
LIGHT button
9
ECHO button
10
VOLUME knob
11
FUNCTION
/
12
(10/M./FOLD.)button
13
/ TUN. button
14
/ /
AUTO button
15
/ TUN. button
16
(10/M./FOLD.)button
17
P-MODE / M. button
18
MIC. VOL. knob
19
CHARGE indicator
20
PAIR indicator
21
DISPLAY
22
EQ button
23
FM ANTENNA
24
AC POWER socket
25
Wired microphone
25
5
4
3
2
1
6
7
8
18
19
20
21
22
17
16
15
14
13
12
11
10
9
23
24
• Do not expose the device to rain, moisture, dripping, or splashing.
• Do not place objects filled with liquids, such as vases, on the
device.
Doing so many cause a fire or electric shock.
• The mains plug is used as disconnect device, the disconnect
device shall remain readily operable.
Doing so many cause a fire or electric shock.
Notes
• If any color shift occurs on a nearby TV or the radio of this device picks up
noise from the TV, keep this device away from the TV.
Disclaimer
• Toshiba shall not be responsible for any damage caused by an
earthquake, thunderstorm, flood damage, fire for which Toshiba is
not responsible, acts of a third party, other accidents, or damages
caused by the user's willful acts or negligence, misuse, or use in
abnormal conditions.
• Toshiba shall not be responsible for any damage caused by failure to
observe the information described in the operation manual.
Disposal
• When disposing of the device, observe the laws, or ordinances and
rules of the local government.
Disposal
• Do not dispose of lead acid batteries except through channels in
accordance with local, state and federal regulations.
• It is illegal to dump lead-acid batteries in landfills or dispose of
improperly.
Please help our Earth by contacting the environmental
protection agencies in your area, the battery manufacturer, or call
Toshiba toll-free at(800)231-1412 for more information about recycling.
About using Bluetooth®
This unit is designed for use with Bluetooth® wireless devices compatible
with the A2DP and AVRCP streaming audio profiles. Refer to your
Bluetooth® device’s user manual or technical support to determine if your
Bluetooth® device supports these profiles.
Frequency band used
This unit uses the 2.4 GHz frequency band. However other wireless devices
may use 2.4 GHz frequency band as well and may cause interference with
each other. To avoid interference, please refrain from the use of the unit at
the same time with other wireless devices.
Certification of this device
This unit conforms to frequency restrictions and has received certification
based on frequency laws, so a wireless permit is not necessary.
However, the following action is punishable by law in some countries:
• Taking apart/modifying the unit.
Usage restrictions
• Wireless transmission and/or use with all Bluetooth® equipped devices is
not guaranteed.
• A device featuring the Bluetooth® function is required to conform to the
Bluetooth® standard specified by Bluetooth SIG, and be authenticated.
Even if the connected device conforms to the above mentioned
Bluetooth® standard, some devices may not be connected or work
correctly, depending on the features or specifications of the device.
Range of use
Use this device within an unobstructed 10 m range. The range of use or
perimeter may be shortened depending on any obstructions, devices
causing interference, other people in the room, or the construction of the
building. Please note that the range mentioned above is not guaranteed.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG,
Inc. and are used under license.
Charging the battery
This unit has a built-in Lead Acid rechargeable battery.
1
To start charging the battery, connect the supplied AC
cord to the socket on the back of the unit, then insert
the plug into an AC receptacle.
The CHARGE indicator lights up in red while the battery is
charging. When the battery is fully charged (around 6 to 7 hours),
the CHARGE indicator turns green. When the battery voltage is
low and needs to be recharged, the CHARGE indicator flashes red.
