•
Make sure that filter cap and emergency drain hose are reinstalled properly, filter
cap should be inserted aligning to hole plates otherwise water may leak.
•
When
the
appliance
is
in
use
and
depending
on
the
programme
selected
there
can
be
hot
water in
the pump
.
Never
remove
the
pump
cover
during
a
wash
cycle
,
always
wait
until
the appliance
has
finished the
cycle
,
and
is
empty
.
When
replacing
the
filter cap
,
ensure
it
is
securely
re-tightened
.
Cleaning The Drain Pump Filter
•
•
Allow the water to cool down.
•
Unplug the machine to avoid electrical shock before maintenance.
•
Drain pump filter can filter the lints and small foreign matters from the
washing.
•
Clean the filter periodically to ensure the normal operation of washing
machine.
Be careful of the hot water!
Open the lower cover cap
Pull out the emergency drain
hose, and take off the hose cap
Open the filter cap by turning
to the counter clockwise
Remove extraneous matter
1
2
3
Close the filter cap and the
lower cover cap
6
Emergency
drain hose
After water runs out,
reset the drain hose
Warning!
Caution!
MAINTENANCES
5
4
Filter cap
31
