background image

     Make sure that all pockets are emptied. Sharp and rigid 

       items such as coin,brooch,nail,screw or stone etc. may 
       cause serious damages to this machine.

     Please check whether the water inside the drum has  

       been drained before opening its door.Please do not open 
       the door if there is any water visible.

     Be careful of burning when the product drains hot 

       washing water.

     Never refill the water by hand during washing.

     After the program is completed, Please wait for two 

       minutes to open the door.

     If it is unavoidable that fabrics that contain vegetable or 

       cooking oil or have been contaminated by hair care 
       products. It be placed in a tumble dryer they should first 
       be washed in hot water with extra detergent , this will 
       reduce, but not eliminate, the hazard.

     Adequate ventilation has to be provided to avoid the back 

       flow of gases into the room from appliances burning other 
       fuels, including open fires.

     Do not dry unwashed items in the appliance.

       Items that have been soiled with substances such as 
       cooking oil, acetone, alcohol, petrol, kerosene, spot 
       removers, turpentine, waxes and wax removers should 
       be washed in hot with an extra amount of detergent 
       before being dried in the appliance.

     Items such as foam rubber (latex foam), shower caps, water 

       proof textiles, rubber backed articles and clothes or pillows 
       fitted with foam rubber pads should not be dried in the 
       machine.

SAFETY INSTRUCTIONS

8

Summary of Contents for TW-BK95G4 Series
































Reviews: