Toshiba TECRA X40-E User Manual Download Page 39

Page: 39 / 132

When you reinstall the Windows operating system, the internal storage

drive will be reformatted and all data will be lost.

If your model has fingerprint function, before you reinstall the Windows

operating system, delete the registered fingerprints. Otherwise, same

fingerprints cannot be registered after the reinstallation.
Make sure to use the default Boot Mode option in TOSHIBA Setup

Utility before restoring.

1. Launch the TOSHIBA Setup Utility.

Refer to the

TOSHIBA Setup Utility

section for further information.

2. In the TOSHIBA Setup Utility screen, select

Advanced -> System

Configuration -> Boot Mode

Note:

Please skip the following contents if you cannot find the Boot

Mode option in your system.

3. Select

UEFI Boot

(Default).

If you create a recovery image using advanced recovery tools from

Control Panel, make sure to use the default Boot Mode option

(UEFI

Boot)

in the TOSHIBA Setup Utility before restoring.

1. Load the Recovery Media into the external optical disc drive or insert

the recovery USB Flash Memory into one available USB port.

2. Click

Start -> (Power)

and then select

Restart

3. Hold down the

F12

key and then release this key just after the

computer is power on.

4. Use the up and down cursor key to select the appropriate option from

the menu according to your actual recovery media.

5. A menu is displayed from which you should follow the on-screen

instructions.

If you have previously chosen to remove the recovery partition without

creating Recovery Media, the Recovery Media cannot be created.
However, if you have already created a Recovery Media, you can use it to

restore the recovery partition.
If you have not created Recovery Media, contact TOSHIBA support for

assistance.

Restoring the pre-installed software from the

Recovery Partition

A portion of the total internal storage drive space is configured as a hidden

recovery partition. This partition stores files which can be used to restore

pre-installed software in the event of a problem.
If you set up your internal storage drive again later, do not change, delete,

or add partitions in a manner other than specified in the manual, otherwise

you might find that space for the required software is not available.

User's Manual

2-15

Summary of Contents for TECRA X40-E





































































































































Search results

Summary of Contents for TECRA X40-E

Reviews:

Related manuals for TECRA X40-E

Brands by name

Popular brands

Toshiba TECRA X40-E, User Manual

Search results

Summary of Contents for TECRA X40-E

Reviews:

Related manuals for TECRA X40-E

Brands by name

Popular brands