manualshive.com logo in svg

Toshiba TECRA A4, User Manual

Share
Download
Toshiba TECRA A4 User Manual Download Page 63

63

Getting Started

Hard Drive Recovery Utilities

5.375 x 8.375 ver 2.3

If the computer does not recognize the memory 
configuration, turn off the computer, remove the memory slot 
cover, and make sure the memory module is seated properly, 
as described in step 

13

 of

 “Adding memory (optional)”

 

starting on page 55.

Hard Drive Recovery Utilities

Your computer has been configured with a hard disk partition 
to allow you to recover your hard disk drive or reinstall 
selected applications and software features or utilities. 

It is strongly recommended that you create recovery CDs/
DVDs before using your system. For more information on 
creating Recovery media, see 

“Creating Recovery CDs/DVDs” 

on page 64.

Using the HDD Recovery, you can:

❖

Create Hard Drive Recovery CDs or DVDs using a 
writable drive.

❖

Recover your hard disk drive to the factory-set default.

❖

Recover just your C: drive, leaving any other partitions 
you may have created intact, for example, a D: drive.

❖

Recover your hard disk drive to the factory-set default 
state without the HDD Recovery partition.

❖

Delete your hard disk drive recovery partition without the 
risk of losing your data.

❖

Reinstall drivers and applications which were bundled 
with your computer.

NOTE

Summary of Contents for TECRA A4





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands