Toshiba TEC POS ST-5600 Series Owner'S Manual Download Page 4

(ii)

Safety Summary

EO1-12023A

CAUTION

This indicates that there is the risk of personal Injury or damage to
objects if the machines are improperly handled contrary to this indication.

   If foreign objects (metal fragments,
water, liquids) enter the machines,
first turn off the power switches and
disconnect the power cord plugs from
the outlet, and then contact your
authorized TOSHIBA TEC repre-
sentative for assistance.  Continued
use of the machine in that condition
may cause fire or electric shock.

Disconnect
the plug.

   Do not remove covers, repair or
modify the machine by yourself.  You
may be injured by high voltage, very
hot parts or sharp edges inside the
machine.
Unauthorized modification is prohib-
ited.

No
disassembling.

   When unplugging the power
cords, be sure to hold and pull on
the plug portion.  Pulling on the cord
portion may cut or expose the inter-
nal wires and cause fire or electric
shock
.

Disconnect
the plug.

   Ensure that the equipment is
properly grounded.  Extension cables
should also be grounded.  Fire or
electric shock can occur on improp-
erly grounded equipment.

Connect a
grounding
wire.

Precaution

The following precautions will help to ensure that this machine will continue to function correctly.

Try to avoid locations that have the following adverse conditions:
*

Temperatures out of the specification

*

Direct sunlight

*

High humidity

*

Shared power socket

*

Excessive vibration

*

Dust/Gas

Do not subject the machine to sudden shocks.

Do not press the keys too hard.  Keys will operate correctly if they are touched lightly.

Clean the cover and keyboard, etc. by wiping with a dry cloth or a cloth soaked with detergent and wrung out
thoroughly.  Never use thinner or other volatile solvent for cleaning.

At the end of the day, turn the power OFF, then clean and inspect the exterior of the machine.

Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to
cause mains interference.

USE ONLY TOSHIBA TEC SPECIFIED consumables.

DO NOT STORE the consumables where they might be exposed to direct sunlight, high temperatures, high
humidity, dust, or gas.

When moving the machine, take hold of the drawer and lift the machine.

Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing
injury.

Do not block the ventilation slits of the machines, as this will cause heat to build up inside the machines and
may cause fire.

Do not lean against the machine. It may fall on you and could cause injury.

Request Regarding Maintenance

Utilize our maintenance services.

After purchasing the machines, contact your authorized TOSHIBA TEC representative for assistance once per year or
so to have the inside of the machines cleaned. Otherwise, dust will build up inside the machines and may cause fire or
malfunction. Cleaning is particularly effective before humid rainy seasons.

Our maintenance service performs the periodic checks and other work required to maintain the quality and

performance of the machines, preventing accidents beforehand.
For details, please consult your authorized TOSHIBA TEC representative for assistance.

Using insecticides and other chemicals

Do not expose the machines to insecticides or other volatile solvents, as this will deteriorate the cabinet or other parts
or cause the paint to peel.

Summary of Contents for TEC POS ST-5600 Series























Reviews: