Toshiba TEC CB-416-T3-QQ Owner'S Manual Download Page 17

Page: 17 / 122

Chapter 2 Printer Installation

2.4

Turning on/off
the Printer

When turned on, the printer checks the print head and memory.
When turned off, the printer will lose data in non-volatile memory.

CAUTION!

Use the power switch to turn on/off the printer. Unplugging
the power cord for turning on/off the printer may cause a fire,
an electric shock, or damage to the printer.

Important!

When the printer is connected to the computer,

•

Turn ON the printer before turning on the computer.

•

Turn OFF the computer before turning off the printer.

Turn on the printer. (

❘

) indicates ON.

2.4.1

Turning on the
Printer

The “ON LINE” message appears on the Message Display. The
POWER LED illuminates green. Then the ON LINE LED also
illuminates green.

Note:

Just in case the printer is not turned
on, or any error message appears,
please see Chapter 6.

POWER

ON LINE

ERROR

FEED

RESTART

PAUSE

ON LINE

Power Switch

Summary of Contents for TEC CB-416-T3-QQ



























































































































Search results

Summary of Contents for TEC CB-416-T3-QQ

Reviews:

Related manuals for TEC CB-416-T3-QQ

Brands by name

Popular brands

Toshiba TEC CB-416-T3-QQ, Owner'S Manual

Search results

Summary of Contents for TEC CB-416-T3-QQ

Reviews:

Related manuals for TEC CB-416-T3-QQ

Brands by name

Popular brands