21
Preparations
Placement
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [
Projection mode]
in the
Default setting
menu
, in accordance with your needs.
WARNING
•
Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing
the unit.
Attempting to clean or replace the lamp in a high location by yourself may cause you to fall,
resulting in injury.
•
If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting
the projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.
Improper mounting could cause the projector to fall, resulting in an accident.
•
If the projector is ceiling-mounted, install the breaker for turning off the power in case of
anomaly. Let everyone involved with the use of the projector know that fact.
Floor-mounted front projection
Floor-mounted rear projection
Ceiling-mounted front projection
Ceiling-mounted rear projection
Summary of Contents for TDP-SP1
Page 46: ......
